HIKVISION DS-K3B802X Series Скачать руководство пользователя страница 123

Страница: 123 / 147

An event-related picture will be captured when the selected event happens.

Note

The device should support recording.

Alarm Output

The alarm output will be triggered for notification.

Alarm Input

Arm or disarm the alarm input.

Note

The device should support alarm input function.

Access Point

The door status of open, close, remain open, or remain closed will be triggered.

Audio Play

The audio prompt will be triggered. And the select audio index related audio content will be

played according to the configured play mode.

8. Click Save.

When the card (configured in Step 5) swipes on the card reader (configured in Step 6), it can

trigger the linked actions (configured in step 7).

9. Optional: After adding the device linkage, you can do one or more of the followings:

Delete Linkage

Settings

Select the configured linkage settings in the device list and click Delete to

delete it.

Edit Linkage

Settings

Select the configured linkage settings in the device list and you can edit its

event source parameters, including event source and linkage target.

8.9 Door Control

In Monitoring module, you can view the real-time status of the doors managed by the added

access control device. You can also control the doors such as open/close the door, or remain the

door open/closed via the client remotely. The real-time access event are displayed in this module.

You can view the access details and person details.

Note

For the user with door control permission, the user can enter the Monitoring module and control

the door. Or the icons used for control will not show. For setting the user permission, refer to

Person Management .

DS-K3B802X Series Swing Barrier User Manual

109

Содержание DS-K3B802X Series




















































































































































Результаты поиска

Содержание DS-K3B802X Series

Отзывы:

HIKVISION DS-K3B802X Series, Руководство пользователя, Страница: 123 / 147

Результаты поиска

Содержание DS-K3B802X Series

Отзывы: