HIKVISION DS-K3B802X Series, Руководство пользователя, Страница: 121 / 147

Before You Start
Add access control device to the client.
Steps
1. Click Event Configuration → Access Control Event .
The added access control devices will display in the device list.
2. Select a resource (including device, alarm input, door, and card reader) from the device list.
The event types which the selected resource supports appear.
3. Select the event(s) and click Edit Priority to define the priority for the event(s), which can be
used to filter events in the Event Center.
4. Set the linkage actions of the event.
1) Select the event(s) and click Edit Linkage to set the client actions when the event(s) are
triggered.
Audible Warning
The client software gives an audible warning when the event is triggered. You can select
alarm sound for the audible warning.
Note
For details about setting the alarm sound, refer to Set Alarm Sound in the user manual of
the client software.
Send Email
Send an email notification about the event to one or more receivers.
For details about setting email parameters, refer to Set Email Parameters in the user
manual of the client software.
2) Click OK.
5. Enable the event so that when the event is detected, event will be sent to the client and the
linkage actions will be triggered.
6. Optional: Click Copy to to copy the event settings to other access control device, alarm input,
door, or card reader.
8.8.2 Configure Device Actions for Access Event
You can set the access control device's linkage actions for the access control device's triggered
event. When the event is triggered, it can trigger the alarm output, host buzzer, and other actions
on the same device.
Steps
Note
It should be supported by the device.
1. Click Access Control → Linkage Configuration .
DS-K3B802X Series Swing Barrier User Manual
107