HIKVISION DS-K3B501S Series страница 88 Скачать руководство пользователя

Страница: 88 / 116

Steps

Note

The linkage actions here refer to the linkage of the client software's own actions such as audible

warning, email linkage, etc.

1. Click Event Management → Access Control Event .

The added access control devices will display in the device list.

2. Select a resource (including device, alarm input, door/elevator, and card reader) from the device

list.
The event types which the selected resource supports will display.

3. Select the event(s) and click Edit Priority to define the priority for the event(s), which can be

used to filter events in the Event Center.

4. Set the linkage actions of the event.

1) Select the event(s) and click Edit Linkage to set the client actions when the events triggered.

Audible Warning

The client software gives an audible warning when alarm is triggered. You can select the

alarm sound for audible warning.

Note

For setting the alarm sound, please refer to Set Alarm Sound in the user manual of client

software..

Send Email

Send an email notification of the alarm information to one or more receivers.
For details about setting email parameters, refer to Set Email Parameters in the user

manual of client software..

2) Click OK.

5. Enable the event so that when the event is detected, en event will be sent to the client and the

linkage actions will be triggered.

6. Optional: Click Copy to... to copy the event settings to other access control device, alarm input,

door, or card reader.

6.8.2 Configure Device Actions for Access Event

You can set the access control device's linkage actions for the access control device's triggered

event. After that, when an event is triggered, it can trigger the alarm output, buzzer on access

controller, and other actions.

DS-K3B501S Series Swing Barrier User Manual

Содержание DS-K3B501S Series





















































































































Результаты поиска

Содержание DS-K3B501S Series

Отзывы:

Похожие инструкции для DS-K3B501S Series

Бренды по названию

Популярные бренды

HIKVISION DS-K3B501S Series, Руководство пользователя

Результаты поиска

Содержание DS-K3B501S Series

Отзывы:

Похожие инструкции для DS-K3B501S Series

Бренды по названию

Популярные бренды