HIKVISION DS-K3B501S Series Скачать руководство пользователя

Страница: 80 / 116

7) Optional: Select the person/card group(s), and then click Apply to re-apply access group that

failed to be applied previously to the access control device.

4. Select an access control point (door) of selected device on the left panel.

5. Enter the maximum interval when entering password.

6. Add an authentication group for the selected access control point.

1) Click Add on the Authentication Groups panel.

2) Select a configured template as the authentication template from the drop-down list.

Note

For setting the template, refer to Configure Schedule and Template .

3) Select the authentication type as Local Authentication, Local Authentication and Remotely

Open Door, or Local Authentication and Super Password from the drop-down list.
Local Authentication

Authentication by the access control device.

Local Authentication and Remotely Open Door

Authentication by the access control device and by the client. When the person swipes

the card on the device, a window will pop up. You can unlock the door via the client.

Figure 6-6 Remotely Open Door

Note

You can check Offline Authentication to enable the super password authentication when

the access control device is disconnected with the client.

Local Authentication and Super Password

Authentication by the access control device and by the super password.

4) Select the added person/card group in the left list below and it will be added to the Selected

list on the right as the authentication group.

5) Click the added authentication group in the right list to set authentication times in the Auth

Times column.

DS-K3B501S Series Swing Barrier User Manual

Содержание DS-K3B501S Series





















































































































Результаты поиска

Содержание DS-K3B501S Series

Отзывы:

Похожие инструкции для DS-K3B501S Series

Бренды по названию

Популярные бренды

HIKVISION DS-K3B501S Series, Руководство пользователя

Результаты поиска

Содержание DS-K3B501S Series

Отзывы:

Похожие инструкции для DS-K3B501S Series

Бренды по названию

Популярные бренды