HIKVISION DS-K3B501S Series страница 66 Скачать руководство пользователя

Страница: 66 / 116

3. Optional: Enter key words (name or person ID) in the input box to filter the person(s) that need

issuing cards.

4. Optional: Click Settings to set the card issuing parameters. For details, refer to .

5. Click Initialize to initialize the card enrollment station or card reader to make it ready for issuing

cards.

6. Click the Card No. column and enter the card number.

Place the card on the card enrollment station.

Swipe the card on the card reader.

Manually enter the card number and press the Enter key.

The person(s) in the list will be issued with card(s).

6.4.21 Report Card Loss

If the person lost his/her card, you can report the card loss so that the card's related access

authorization will be inactive.
Steps

1. Enter Person module.

2. Select the person you want to report card loss for and click Edit to open the Edit Person

window.

3. In the Credential → Card panel, click on the added card to set this card as lost card.

After reporting card loss, the access authorization of this card will be invalid and inactive. Other

person who gets this card cannot access the doors by swiping this lost card.

4. Optional: If the lost card is found, you can click to cancel the loss.

After cancelling card loss, the access authorization of the person will be valid and active.

5. If the lost card is added in one access group and the access group is applied to the device

already, after reporting card loss or cancelling card loss, a window will pop up to notify you to

apply the changes to the device. After applying to device, these changes can take effect on the

device.

6.4.22 Set Card Issuing Parameters

The client provides two modes for reading a card's number: via card enrollment station or via the

card reader of the access control device. If a card enrollment station is available, connect it to the

PC running the client by USB interface or COM, and place the card on the card enrollment to read

the card number. If not, you can also swipe the card on the card reader of the added access control

device to get the card number. As a result, before issuing a card to one person, you need to set the

card issuing parameters including the issuing mode and related parameters.
When adding a card to one person, click Settings to open the Card Issuing Settings window.

DS-K3B501S Series Swing Barrier User Manual

Содержание DS-K3B501S Series





















































































































Результаты поиска

Содержание DS-K3B501S Series

Отзывы:

Похожие инструкции для DS-K3B501S Series

Бренды по названию

Популярные бренды

HIKVISION DS-K3B501S Series, Руководство пользователя

Результаты поиска

Содержание DS-K3B501S Series

Отзывы:

Похожие инструкции для DS-K3B501S Series

Бренды по названию

Популярные бренды