9. Click Save.
The attendance status will be valid within the configured time duration.
Result
Enter the device initial page, the current attendance mode will be displayed on the page. If you do
not select a status, the authentication will be marked as the configured attendance status
according to the configured time. If you press the key on the keypad, and select a status to take
attendance, the authentication will be marked as the selected attendance status.
Example
If set the Up key as check in and the Down key as check out, and set the check in's time as Monday
08:00, and check out's time as Monday 17:00, the valid person's authentication before 17:00 on
Monday will be marked as check in. And the valid person's authentication after 17:00 on Monday
will be marked as check out.
6.6 Configure Linkage Actions for Access Control
You can configure different linkage actions for the event detected by the access control device.
After that, linkage actions will be triggered once the event happens. This mechanism is used for
notifying the security personnel the event, or triggering automatic access control in real time.
Two types of linkage actions are supported:
●
Client Actions: When the event is detected, it will trigger the actions on the client, such as the
client making an audible warning..
●
Device Actions: When the event is detected, it will trigger the actions of a specific device, such
as buzzing of a card reader and, opening/closing of a door, ..
6.6.1 Configure Client Actions for Access Event
Even if you are far away from an access point, you can still know what happens and how urgent the
event is by configuring linked actions of access event on the client. You will be notified on the client
once an event is triggered, so that you can response to the event instantly. You can also configure
client actions of access points in a batch at a time.
Steps
Note
The linkage actions here refer to the linkage of the client software's own actions such as audible
warning, email linkage, etc.
1. Click Event Management → Access Control Event .
The added access control devices will display in the device list.
2. Select a resource (including device, alarm input, door/elevator, and card reader) from the device
list.
DS-K1A802A Series Fingerprint Time Attendance Terminal User Manual
75
