Chapter 7 Remote Configuration (Web)
Configure device parameters remotely.
7.1 Time Management
Manage device's time zone, time synchronization, and DST parameters.
Time Zone and Time Synchronization
On the Device for Management page, select a device and click → System → Time to enter the
Time tab.
You can select a time zone, set NTP parameters, or manually synchronize time.
Time Zone
Select a time zone from the drop-down list.
NTP
The device will synchronize time with NTP automatically. After you enable NTP, you should set
the NTP server address, NTP port, and synchronization interval.
Manual Time Synchronization
After you enable Manual Time Synchronization, you can manually set the device time.
If you check Synchronize with Computer Time, the Set Time will display the current computer's
time. At this time, uncheck Synchronize with Computer Time, and click , you can edit the
device time manually.
Click Save to save the settings.
DST
On the Device for Management page, click Remote Configuration → System → Time → DST to
enter the DST tab.
Enable DST and you can edit the DST bias time, the DST start time, and end time.
Click Save.
7.2 Set Network Information
7.2.1 Network Parameters Settings
Set device network parameters, including the NIC type, DHCP, and HTTP.
On the Device for Management page, click → Network → Network Parameters to enter the
Network Parameters Settings tab.
DS-K1A802A Series Fingerprint Time Attendance Terminal User Manual
104
