HikRobot ID6000 Series, Руководство пользователя

Страница: 30 / 80

ID6000 Series Smart Code Reader User Manual
21
Chapter 7 Camera Settings
You are recommended to complete camera settings in following order: Device Connection →
Image Settings → Algorithm Settings → I/O Control Settings → Data Processing →
Communication Settings → Configuration Management.
Note
Before specific camera settings, you need to set camera mode as Normal. Otherwise, the camera
parameters may be different. Regarding camera mode, refer to Camera Mode Settings for details.
● Device Connection: It tells you how to connect the camera to the client software. And you can
configure and operate the camera remotely via the client software only when you have
connected the camera to the client software. Refer to Connect Camera to Client Software for
details.
● Image Settings: It tells you how to set image related parameters of the camera via client
software. Refer to Image Quality Settings for details.
● Algorithm Settings: It tells you how to set the types of barcode to be read, the 1D code
algorithm, the 2D code algorithm, etc. Refer to Barcode Algorithm Settings for details.
● I/O Control Settings: It tells you how to set the parameters related to the control of input and
output signals of device. Refer to Signal Input Settings and Signal Output Settings for details.
● Data Processing: It tells you how to set filter rules for reading barcodes and other data
processing related parameters. Refer to Code Reading Result Settings for details.
● Communication Settings: It tells you how to select different communication protocols, and set
their corresponding parameters. Refer to Communication Settings for details.
● Configuration Management: It tells you how to set and manage the user parameters, restart
device, etc. Refer to User Set Customization for details.
7.1 Connect Camera to Client Software
Make sure your camera IP address is in the same network segment with the PC where you
installed the client software before connecting the camera to it.
Double click the camera name in the device list, or click
to connect the camera to the client.
7.2 Camera Mode Settings
The camera supports 3 types of operating modes, including Test, Normal, and Raw. You can select
different modes in live view window according to actual demands.
Note
Stopping real-time acquisition is required before selecting modes.