HikRobot ID6000 Series, Руководство пользователя

Страница: 56 / 80

ID6000 Series Smart Code Reader User Manual
47
Figure 7-37 Select Read Success
Select Light Strobe Long
If you select LightStrobeLong as Line Out Activation Event, you do not need to set any
parameters.
Select Light Continued
If you select LightContinued as Line Out Activation Event, you do not need to set any parameters.
7.7 Code Reading Result Settings
In Data Processing module, you can set filter rules for reading barcodes and other data processing
related parameters.
7.7.1 Set Code Reading Result Output Mode
There are 2 types of output modes when the camera mode is Normal and trigger mode is On:
Instant output mode and non-instant output mode.
●
Instant output mode means that the device can instantly output code reading results when
recognizing codes if you enable Instant Output Mode Enable in Filter Rule.
● Non-instant output mode means that the device does not output code reading results it
recognized until the trigger stops if Instant Output Mode Enable is not enabled. If the device does
not recognize any codes during the whole process, images it captured will be output, and you can
set which images to be outputted in NoRead Image Index.
When the camera mode is Normal and trigger mode is Off, you can set Filter Time in Filter Rule.
Within the configured Filter Time, the device will not output any code information.
Note
The filter rule and data processing parameters may differ with different camera modes and trigger
modes.