Highland RIDGE RV, Руководство пользователя

Страница: 59 / 155

53
v
ehicle
O
peratiOn
rubber “pedal” (arrow in Fig. C). Push the “pedal” down with your foot, and slide the
round aluminum foot on the railing into the slot.
Release the pedal, and the aluminum railing support will securely latch into place in the
bracket. Insert all the round aluminum railing supports into the brackets around the cargo
ramp door.
Closing the party deck:
Begin with the (2) aluminum slotted brackets at the end of the cargo ramp. Step on the
pedals and slide the end rail supports out of the slotted brackets.
Fold the end rail sections back toward the side rails.
Step on the pedals for the side aluminum slotted brackets to release the side railing
supports. Secure the end rail sections to the side rail sections with the velcro tab(s).
To fold up the ramp door, pull the left side railing (as viewed from inside the recreation
vehicle, looking out the back) across the door opening. The wheels on the railing will
be up on the diamond plate transition
Next, pull the right side railing in across the door opening and against the left side
railing. Wheels on the right side railing should also be on the diamond plate transition.
Disconnect the cargo ramp door safety pins and detach the cables from the ramp door.
Remove the safety pins and store them in a safe location.
Close the cargo ramp door making sure all latches are securely in place.
NOTE:
The left railing MUST be folded across the opening first or
the door will not close.
NOTE: When returning the cargo ramp door to the stowed position,
remove the safety pins from the ramp door cable brackets. Store
the safety pins in a safe location. Do not replace them on the cable
brackets as the door will not close properly. Cables should remain
attached to the brackets at the top of the door frame.