Highland RIDGE RV, Руководство пользователя

Страница: 53 / 155

47
v
ehicle
O
peratiOn
1. Keep the recreational vehicle attached to the tow vehicle. Block the tire on the opposite
side of the recreational vehicle from the tire you are changing.
2. Loosen the wheel lug on the tire you are changing before jacking up the vehicle. DO
NOT remove the lug nuts; only loosen them for ease of removal when the tire is off
the ground.
3. Locate the main frame rail of the trailer (it spans from front-to-back just inside the
tires).
4. To raise the recreation vehicle, place the jack (hydraulic or screw) under the main frame
rail. It must be just ahead of the front tire or just behind the rear tire.
Replacement
If you experience a flat tire on your recreation vehicle while driving, gradually decrease your
vehicle speed (if possible). Hold the steering wheel firmly and move the recreation vehicle
to a safe place on the side of the road.
Any service or warranty coverage on tires is to be handled by the tire store representing the
brand installed on your RV. They are not to be returned to your dealer or Highland Ridge.
If you have questions regarding your tires, contact the tire manufacturer or Highland
Ridge Customer Service.
Never raise the recreational vehicle by placing the jack under the axle, springs
or any attachment parts. Failure to comply could result in property damage,
personal injury. or death.

Be sure to use only tires that are rated for recreation vehicle use. The use
of passenger tires should be avoided. The load rating/range embossed on the
sidewall of passenger tires must be de-rated accordingly; they do not have
the same load capability as tires that are specifically identified for recreation
vehicle use. Failure to use tires that are properly matched to your recreation
vehicle could lead to premature tire wear or less than optimum trailer handling.

When replacing a tire make sure to replace it with a tire of the same size and
specifications (refer to the Federal Certification label.)

t
rAvel
t
rAiler
s
et
u
p
1. Position the RV as desired.
2. Level the RV (side-to-side).
3. Block the wheels securely to prevent the RV from moving.
4. Unhook the wire harness/connector plug, safety chains and breakaway switch lanyard.