Hewlett Packard Enterprise HPE ProLiant DL385 Gen10 Plus, Руководство по техническому обслуживанию и ремонту

Страница: 61 / 179

4. Remove the access panel.
CAUTION: Do not operate the server for long periods with the access panel open or removed. Operating the server
in this manner results in improper airflow and improper cooling that can lead to thermal damage.
5. Remove the fan cage.
IMPORTANT: For optimum cooling, install fans in all primary fan locations.
For more information, see
Fan bay numbering.
To replace the component, reverse the removal procedure.
Removing and replacing the OCP NIC 3.0 adapter
WARNING: To reduce the risk of personal injury, electric shock, or damage to the equipment, remove power from the
server by removing the power cord. The front panel Power On/Standby button does not shut off system power. Portions
of the power supply and some internal circuitry remain active until AC power is removed.
Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Disconnect any external cables that are connected to the expansion board.
4. Do one of the following:
Removal and replacement procedures
61