manualshive.com logo in svg

Hewlett Packard Enterprise HPE ProLiant DL385 Gen10 Plus, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
Hewlett Packard Enterprise HPE ProLiant DL385 Gen10 Plus Скачать руководство пользователя страница 101

4.

Remove all power:

a. Disconnect each power cord from the power source.

b. Disconnect each power cord from the server.

5.

Do one of the following:

•

Extend the server from the rack.

•

Remove the server from the rack.

• Remove the compute module from the enclosure.

6.

Place the server on a flat, level work surface.

7.

Remove the access panel.

8.

Remove the primary PCIe riser cage.

9.

Remove the boot device.

10. Remove the drives from the boot device.

Retain these drives for installation onto the replacement boot device.

To replace the component, reverse the removal procedure.

Removing and replacing a boot device drive

The boot device supports two physical drive sizes:

• 22110 model (110mm)

• 22080 model (80mm)

Removal and replacement procedures

101

Содержание HPE ProLiant DL385 Gen10 Plus




















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды