Hewlett Packard Enterprise HPE ProLiant DL385 Gen10 Plus, Руководство по техническому обслуживанию и ремонту

Страница: 47 / 179

Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Remove the server from the rack.
4. Place the server on a sturdy, level surface.
IMPORTANT: When removing the rail from the rack, always remove the front of the rail first.
5. Remove the rail from the rack.
To replace the component, reverse the removal procedure.
Removing and replacing the cable management arm
WARNING: To reduce the risk of personal injury or damage to the equipment, you must adequately support the
enclosure during installation and removal.
Prerequisites
Before you begin, be sure that you have the appropriate screwdriver for the screws in the rack.
Procedure
1. Power down the server.
2. Remove all power:
Removal and replacement procedures
47