Hewlett Packard Enterprise HPE ProLiant DL385 Gen10 Plus, Руководство по техническому обслуживанию и ремонту

Страница: 87 / 179

To replace the component, reverse the removal procedure.
For DIMM configuration information, see the server user guide.
Removing and replacing a heatsink
This procedure shows a standard heatsink as an example. The replacement process is the same for both the standard and
high-performance heatsinks.
Hewlett Packard Enterprise recommends identifying the processor and socket components before performing this
procedure.
Prerequisites
Before you perform this procedure, make sure that you have the following items available:
• T-20 screwdriver
• 1.0 gm (0.5 ml) or two 0.5 gm (0.25 ml) of thermal grease
• Alcohol wipe
Procedure
1. Power down the server.
2.
Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
•
Extend the server from the rack.
•
Remove the server from the rack.
4. Remove the access panel.
5. Do one of the following:
Removal and replacement procedures
87