Hewlett Packard Enterprise HPE ProLiant DL385 Gen10 Plus, Руководство по техническому обслуживанию и ремонту

Страница: 93 / 179

12. Install the spare processor:
a. Hold the processor by its carrier handle and slide the processor into the rail frame until it engages with a click sound.
b. Hold the lift tabs near the front end of the rail frame and pivot the rail frame to the closed position.
A click sound indicates that the rail frame is properly engaged.
13. Close the force frame:
CAUTION: Do not overtighten the screws as this might damage the system board or the processor socket.
a. Pivot the spring loaded force frame downward and hold it down (callout 1).
b. Use a T-20 Torx screwdriver to tighten the captive screws in the sequence shown in the following image (callouts 2–
4).
When using a torque wrench to tighten the screws, apply a torque of 1.58 N-m (14 lbf-in).
Removal and replacement procedures
93