manualshive.com logo in svg

Hewlett Packard Enterprise HPE ProLiant DL385 Gen10 Plus, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
Hewlett Packard Enterprise HPE ProLiant DL385 Gen10 Plus Скачать руководство пользователя страница 86

To replace the component, reverse the removal procedure.

DIMM-processor compatibility

The installed processor determines the type of DIMM that is supported in the server:

AMD EPYC processors support DDR4-3200 DIMMS.

Mixing DIMM types is not supported. Install only the supported DDR4-3200 DIMMs in the server.

Removing and replacing a DIMM

To identify the DIMMs installed in the server, see 

DIMM slot locations.

Procedure

1. Power down the server.

2. Remove all power:

a. Disconnect each power cord from the power source.

b. Disconnect each power cord from the server.

3. Do one of the following:

•

Extend the server from the rack.

•

Remove the server from the rack.

4. Remove the access panel.

5. Do one of the following:

•

Remove the air baffle.

•

Remove the 4 LFF midplane cage.

6. Remove the DIMM.

Removal and replacement procedures

86

Содержание HPE ProLiant DL385 Gen10 Plus




















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды