Hewlett Packard Enterprise HPE ProLiant DL385 Gen10 Plus, Руководство по техническому обслуживанию и ремонту

Страница: 117 / 179

Prerequisites
Embedded UEFI Shell is set to Enabled.
Procedure
1. From the System Utilities screen, select Embedded Applications > Embedded UEFI Shell.
The Embedded UEFI Shell screen appears.
2. Press any key to acknowledge that you are physically present.
This step ensures that certain features, such as disabling Secure Boot or managing the Secure Boot certificates using
third-party UEFI tools, are not restricted.
3. If an administrator password is set, enter it at the prompt and press Enter.
The
Shell>
prompt appears.
4. Enter the commands required to complete your task.
5. Enter the
exit
command to exit the Shell.
Intelligent Provisioning
Intelligent Provisioning is a single-server deployment tool embedded in ProLiant servers and HPE Synergy compute modules.
Intelligent Provisioning simplifies server setup, providing a reliable and consistent way to deploy servers.
Intelligent Provisioning 3.30 and later includes HPE Rapid Setup Software. When you launch F10 mode from the POST screen,
you are prompted to select whether you want to enter the Intelligent Provisioning or HPE Rapid Setup Software mode.
NOTE: After you have selected a mode, you must reprovision the server to change the mode that launches when you boot to
F10.
Intelligent Provisioning prepares the system for installing original, licensed vendor media and Hewlett Packard Enterprise-
branded versions of OS software. Intelligent Provisioning also prepares the system to integrate optimized server support
software from the Service Pack for ProLiant (SPP). SPP is a comprehensive systems software and firmware solution for
ProLiant servers, server blades, their enclosures, and HPE Synergy compute modules. These components are preloaded with a
basic set of firmware and OS components that are installed along with Intelligent Provisioning.
IMPORTANT: HPE ProLiant DX/XL servers do not support operating system installation with Intelligent Provisioning,
but they do support the maintenance features. For more information, see "Performing Maintenance" in the Intelligent
Provisioning user guide and online help.
After the server is running, you can update the firmware to install additional components. You can also update any
components that have been outdated since the server was manufactured.
To access Intelligent Provisioning:
• Press
F10 from the POST screen and enter either Intelligent Provisioning or HPE Rapid Setup Software.
• From the iLO web interface using Always On. Always On allows you to access Intelligent Provisioning without rebooting
your server.
Intelligent Provisioning operation
NOTE: Intelligent Provisioning 3.40 and later requires iLO firmware version 2.10.
Diagnostic tools
117