Hettich EBA 200, Инструкции по ремонту

Страница: 8 / 66

8/65
6 Error messages
6.1 Perform a MAINS RESET
•
Switch off the mains switch (switch position "0").
•
Wait for at least 10 seconds and then switch the mains switch back on (switch position "I").
6.2 Brief description
Error designation No. Brief description Page
--- --- No display. 10
TACHO ERROR 1 Speed pulse failure during the centrifugation run 10
TACHO ERROR 2 After the start command, there are no speed pulses. 10
LID ERROR 4.1 Lid lock error 11
LID ERROR 4.2 Lid lock error 11
LID ERROR 4.3 Lid lock error 11
LID ERROR 4.4 Lid lock error 11
LID ERROR 4.5 Lid lock error 11
LID ERROR 4.6 Lid lock error 11
LID ERROR 4.7 Lid lock error 11
LID ERROR 4.8 Lid lock error 11
LID ERROR 4.9 Lid lock error 11
LID ERROR 4.10 Lid lock error 12
LID ERROR 4.126 Lid lock error 11
LID ERROR 4.127 Lid lock error 11
OVER SPEED 5 Overspeed 12
MAINS INTERRUPT Mains interruption during the centrifugation run 12
MAINS INTER 11 Mains interruption during the centrifugation run 12
VERSION ERROR 12 Incorrect centrifuge model recognized 12
UNDER SPEED 13 Underspeed 13
CTRL ERROR 25.1 Control panel error: EEPROM 13
CTRL ERROR 25.2 Control panel error: EEPROM 13
CRC ERROR 27.1 Control panel error: ROM 13
COM ERROR 31 No connection between the frequency converter on the electronics (A1)
and the serial interface 13
COM ERROR 34 No correct data transmission between the control panel and the frequency
converter on the electronics (A1) 13
COM ERROR 36 No response (NAK) from the frequency converter on the electronics (A1) to
the control panel 13
FC ERROR 60 Faulty enable signal to the frequency converter on the electronics (A1) 14
FC ERROR 61.1 Error of the frequency converter on the electronics (A1): Undervoltage 14
FC ERROR 61.2 Error of the frequency converter on the electronics (A1): Overvoltage 14
FC ERROR 61.4 Error of the frequency converter on the electronics (A1): Overtemperature
in the frequency converter 14
FC ERROR 61.5 Error of the frequency converter on the electronics (A1): Overtemperature
in the motor 15