Hettich EBA 200, Инструкции по ремонту

Страница: 42 / 66

42/65
SELECT
•
Press the key.
Machine version.
t/min:s RPM >RCF<
↓
STOP
OPEN
•
Press the key twice to exit the menu
"
Test" or press it three times to exit the
" SELECT MENU ".
t/min:s RPM >RCF<
Example:
t/min:s RPM >RCF<
7.4.5 Displaying the contents of the memory cells of the EEPROM
The contents of the EEPROM memory cells can be displayed.
With the rotor at a standstill, the contents of the EEPROM memory cells can be displayed as follows:
The procedure can be aborted at any time by pressing the
STOP
OPEN
key. In this case, the settings are not stored.
START
PULSE
+
STOP
OPEN
+
•
Keep both keys pressed and
switch on the mains switch at
the same time.
t/min:s RPM >RCF<
↓
SELECT
•
Press the key until the following is
displayed:
t/min:s RPM >RCF<
↓
START
PULSE
•
Press the key.
t/min:s RPM >RCF<
↓
START
PULSE
•
Press the key.
The contents of the memory cells having
addresses 00 to 03 are displayed.
Example:
Adr0000 = C350C350
Addr. 00 = C3 50C350
Addr. 01 = C3 50 C350
Addr. 02 = C350 C3 50
Addr. 03 = C350C3 50
Example:
t/min:s RPM >RCF<
↓
t
•
Press the key.
The contents of the memory cells having
addresses 04 to 07 are displayed.
Example:
Adr0004 = 03E803E8
Example:
t/min:s RPM >RCF<
↓
t
•
The contents of the memory cells having
addresses 00 to FF can be displayed with
the keys.
Example:
t/min:s
RPM
>RCF<
↓
STOP
OPEN
•
Press the key three times to exit the
"
EEPROM" menu or four times to exit
the " SELECT MENU ".
t/min:s
RPM
>RCF<
Example:
t/min:s
RPM
>RCF<