Operation Manual
BinTra
c Operator’s Manual Ver. 3.18 Rev. 1.01
10
Part Number MAN-000004-2
Station ID Value
Sets the Station ID of the device. When interfacing the device to a Communication Hub (CH100), set this value
between from 1 to 127.
Each BinTrac device must have a unique Station ID
.
1. Press the BIN key to select the desired Bin.
2. Use the UPPER
key to increase the value by 1.
3. Use the LOWER key to decrease the value by 1.
Segmented display:
Software Version (Version 3.0 and higher)
Displays the BinTrac programmed software version number. This number may be required if technical help is needed.
1. Press the BIN key to see the software version number.
Segmented display:
Smart Summing Box Software Version (Version 3.0 and higher)
Displays the software version number of each of the connected Smart Summing Boxes. This number may be required if
technical help is needed.
1. Press the BIN key to see the software version for each enabled bin.
Segmented display:
End
Allows the user to exit SETUP mode.
1. Press the BIN button to exit SETUP mode.
Segmented display:
