background image

Operation Manual                                                                                                                                                                                                                                         
 

Version 2.0                                                                                             

52                                        

Part Number MAN-000009 

 

HerdStar BinTrac

®

 Warranty 

 
HerdStar,  LLC  (“

HerdStar

”)  warrants  to  original  purchaser  (“

Buyer

”)  that  goods  manufactured  solely  by  HerdStar,  LLC 

(“

Products

”) will be free from defects in material or workmanship under normal and intended use and service for a period of one 

year  from  delivery  date  of  the  Products.  Used  and/or  refurbished  parts  sold  shall  carry  a  90-day  warranty  on  material  and 
workmanship. All warranty claims must be submitted within ten (10) days of discovery of defects within the warranty  period or 
shall be deemed waived. Furthermore, HerdStar, LLC warrants the load cell (“Load cell” is defined as the s-shaped component and 
any cabling and connectors) against lightning damage for 12 months or the term of any extended warranty.  
 
In the event of a defect in any Products constituting a breach of the warranty provided herein, HerdStar, LLC will at its option either 
(i) repair or replace such Product free of charge, or (ii) in lieu of repair or replacement, refund to Buyer the original purchase price 
less the reasonable value of Buyer’s use of the Products. HerdStar, LLC shall furnish to Buyer instructions for the disposition of 
the defective goods. HerdStar, LLC shall have the option of requiring the return of the defective goods, transportation prepaid, and 
proof  that  the  goods  were  not  used,  installed  or  altered or subject  to  misuse  or  abuse  to  establish  the  claim.  No  goods  shall  be 
returned to HerdStar, LLC without its prior consent. The acceptance of any goods returned to HerdStar, LLC shall not be deemed 
an admission that the goods are defective or in breach of any warranty, and if  HerdStar, LLC determines that the goods are not 
defective they may be returned to Buyer at Buyer’s expense. This warranty sets forth Buyer’s sole and exclusive remedies for any 
defect in the goods. The rights and obligation under this warranty may not be assigned or delegated to a third party by Buyer without 
the prior written permission of HerdStar, LLC. Neither Buyer nor any other person may modify or expand the warranty provided 
herein, waive any of the limitations, or make any different or additional warranties with respect to the Products. Any statements to 
the contrary are hereby rendered null and void unless expressly agreed to in writing by an authorized officer of HerdStar, LLC. 
 
EXCEPT  AS  STATED  IN  ABOVE,  HERDSTAR,  LLC  DOES  NOT  MAKE  ANY  WARRANTY  AS  TO  THE  GOODS  OR 
SERVICES AND, IN PARTICULAR, DOES NOT MAKE ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR 
ANY  PARTICULAR  PURPOSE,  AND  BUYER  IS  SOLELY  RESPONSIBLE  FOR  DETERMINING  THE  PROPER 
APPLICATION AND USE OF THE GOODS.  
 
HerdStar, LLC makes no representation or warranty that individual animals, or any given population of animals, will utilize any of 
HerdStar,  LLC’s  goods  in  the  manner  for  which  the  goods  were  intended  or  designated.  Any  component  parts  that  are  not 
manufactured by HerdStar, LLC, such as electrical motors and controls, are excluded from any warrant by HerdStar, LLC, although 
such parts may be covered by separate warranties of the respective manufacturers. This warranty set forth above does not apply if 
all components of a system are not supplied by HerdStar, LLC or if the goods are not purchased from and installed by an authorized 
distributor or company warehouse, or installed and operated in accordance with HerdStar LLC’s specifications and instructions.  
 
HERDSTAR, LLC SHALL NOT HAVE ANY TORT LIABILITY TO BUYER OR ANY OTHER PERSON WITH RESPECT 
TO  ANY  OF  THE  GOODS  OR  SERVICES  AND  SHALL  NOT  BE  LIABLE  FOR  CONSEQUENTIAL,  INCIDENTAL, 
SPECIAL,  EXEMPLARY,  INDIRECT  OR  PUNITIVE  DAMAGES  ARISING  FROM  ANY  PRODUCT  DEFECT,  DELAY, 
NONDELIVERY,  RECALL  OR  OTHER  BREACH.  BUYER  SHALL  NOT  HAVE  ANY  RIGHT  OF  REJECTION  OR  OF 
REVOCATION OF ACCEPTANCE OF THE GOODS.  

 
 
 
 
 
 

Содержание BinTrac Breeder Control





















































Отзывы: