herdstar BinTrac Breeder Control, Руководство по эксплуатации

Страница: 34 / 52

Operation Manual
Version 2.0
34
Part Number MAN-000009
5. Use the or key to adjust the Batch Target Weight. The weight entered will be automatically saved for
the next batch cycle.
6. Press SELECT to display the batch run control status ( or ).
7. Press the or key until is displayed.
8. Press SELECT to start Batching. The batch run will immediately enable the withdrawal auger, indicated by
RUN LED solid on. When the Batch Target Weight amount has been reached, the withdrawal auger will
automatically be disabled.
Pause Batch Run
1. To pause a batch in mid run, press the key twice and is displayed. Press SELECT key to pause
the batch run.
2. When paused, the indicator will alternate between and the remaining batch amount on the screen.
3. To restart the batch, press the key until is displayed, then press the SELECT key. The batch will
then continue until completed.
Display Fill Events
This procedure allows you to view the last four recorded fill events.
1. Press the key until is displayed.
2. Press SELECT to view the last recorded fill event.
3. Press the key to view other prior recorded fill events.
4. Press SELECT to return to Weight Display mode or unit will return to Weight Display mode after a period of
time with no activity (no keystrokes).
Display 24 Hour Usage
This procedure allows you to view the last four 24-hour usage amounts.
1. Press the key twice until is displayed.
2. Press SELECT to view the last recorded 24-hour usage amount.
3. Press key to view other prior recorded usage amounts.
4. Press SELECT to return to Weight Display mode or unit will return to Weight Display mode after a period of
time with no activity (no keystrokes).
Optional - Scheduled Feeding Unload from Weigh Bin
Unload from the weigh bin the programmed net weight amount at a scheduled time daily.
1. Switch Feeding Auto/OFF/On toggle switch to Auto.
2. Press the key once and will be displayed.
3. Press the key a second time and will be displayed. Press SELECT to display the current
scheduled time.
4. Use the or key to select the schedule (hour and minute) for the batch to start.
Note: This is a 24-hour clock. i.e. 13:00 = 1:00 p.m. Once entered, the time will be saved until changed.
5. Press SELECT to view the Batch Target Weight value. Last programmed Batch Target Weight value will be
displayed.