herdstar BinTrac Breeder Control, Руководство по эксплуатации

Страница: 50 / 52

Operation Manual
Version 2.0
50
Part Number MAN-000009
This means that the Smart Summing Box for the selected bin is not communicating with the BinTrac Indicator.
1. Disable bins on Indicator that do not have an associated Smart Summing Box and bin
2. Verify wiring between Indicator and Smart Summing Box
3. Inspect Smart Summing Box internal diagnostic light
a. Off: Smart Summing Box not receiving power
b. Steady flashing: normal working condition
c. Irregular flashing: unable to communicate.
4. Verify Smart Summing Box has been programmed as the correct bin
a. Verify Smart Summing Box dip switch settings (see Figure 2)
b. Verify that two or more Smart Summing Boxes have not been
programmed as the same bin
c. Check for broken wires or loose connections
5. Check for faulty load cell (See Load Cell Troubleshooting Procedures )
This means that the weight in the bin has exceeded the programmed system capacity by 150% and the system is in
an
over-load state.
1. Verify programmed settings are correct
2. Check for physical binding of brackets/hardware
4. Remove the weight from the system and check the condition of each load cell (See
Load Cell
Troubleshooting Procedures )
This means that the Remote Display has lost communications with the host BinTrac Indicator.
1. Verify unit was intended for use as a Remote Display and not programmed incorrectly
a. Bin A LED should be solid in setup menu if unit is intended to be configured as remote display. If unit
is NOT intended to be a remote display, Bin A LED should be blinking in setup menu (see Page 7 ).
2. Check for broken wires or loose connections
3. Verify wiring is correct between Indicator and Remote Display
This error message indicates that the BinTrac Indicator has been programmed for a pulse output and is unable to
communicate with the HouseLink WP.
1. Verify HouseLink WP dip switch settings (See HouseLink manual)
2. Check for broken wires or loose connection
B IN S 1 S 2 S 3 S 4
A OFF OFF OFF OFF
B ON OFF OFF OFF
C OFF ON OFF OFF
D ON ON OFF OFF
Figure 2