herdstar BinTrac Breeder Control, Руководство по эксплуатации

Страница: 7 / 52

Operation Manual
Version 2.0
7
Part Number MAN-000009
System Settings
The SETUP mode is used to configure the different settings and parameters of the BinTrac
Breeder Control.
Note: If there is no activity for a period of time while in SETUP mode, the system will exit
SETUP mode and return to Weight Display mode.
Accessing the Setup mode
1. Press and hold the SELECT button down until is displayed.
Segmented display:
Navigating Setup mode
To navigate through the options in SETUP mode, use the
and keys to cycle through the
options/parameters. Refer to the SETUP menu flow chart to the right.
Selecting an Option in Setup mode
To select an option/parameter to edit in SETUP mode, you must navigate to the option
you wish to edit using the
and keys. Press the SELECT key when you reach the desired
option.
Options in Setup Mode
In the SETUP Mode, the four LEDs indicate configuration options as being enabled
(solid on) or disabled (flashing).
GROSS WEIGHT - Configures a BinTrac or Breeder Indicator as a Remote
Display automatically when connected to a Master Breeder
Control with Peripheral Devices enabled.
BATCH AMT - NOT USED
LED (left of RUN) - NOT USED
RUN - Enable communications to Peripheral devices.
Must be enabled when Breeder Control is connected to a
Remote Display device (REMOTE BinTrac or Breeder Control
console).
SETUP Menu
Flow Chart