herdstar BinTrac Breeder Control, Руководство по эксплуатации

Страница: 29 / 52

Operation Manual
Version 2.0
29
Part Number MAN-000009
Capacity (L.C.CAP)
The load cell system capacity is the sum of all the load cells rated capacity in either pounds or kilograms. This
parameter sets the calibration of the system. To determine this value, multiply the number of load cells by their
capacity.
Example: A four leg bin with 5k load cells would require an L.C.CAP setting of 20000 pounds.
Segmented display:
6. Press the SELECT key. The display will show the current setting (default is 30000).
7. Use the and keys to increase or decrease the value. Hold the key down to increase/decrease quickly.
8. Upon setting the appropriate value, press SELECT and the display will show .
9. Press the key and is displayed.
Full Value
This value is the maximum weight of a full bin in either pounds or kilograms as is for calibration of the LED bar graph
level. The value determines at what weight the bar graph will display completely full (all 16 LEDs lit). Set this to the
maximum amount of feed that you would consider the bin to be full.
Segmented display:
10. Press the SELECT key.
11. Use the and keys to increase or decrease the value. Hold the key down to increase/decrease quickly.
12. Upon setting the appropriate value, press SELECT and the display will show .
Zero Value
Sets the weight of the empty bin in either pounds or kilograms. Convenient when wanting to calibrate a system when
a small amount of feed is already in the bin. The zero value is used to compensate for the empty weight of the bin to
give an accurate value for the net weight of the material inside the bin. The Breeder Control calculates the material
weight as the total weight less the zero (empty) weight value.
Example: A bin weighs 1200 pounds empty. In standard operation mode, simply press and hold on both the
and keys until displays. This would then set the zero value in the SETUP mode to 1200.
Segmented display: