Helmer iBX020, Руководство по техническому обслуживанию

Страница: 26 / 55

360203-1/B
25
Maintenance & Service
9.6.5 Door and Panel Gaskets
NOTE
Avoid getting water in the Access Control magnetic lock.
Required tools:
► Soft cotton cloth (2)
► Mild soap and water solution
Clean the door gaskets:
1
Using a soft cotton cloth, apply soap and water solution to the door gaskets and gasket crevices.
2
Using a second clean and dry cotton cloth, wipe the door gaskets clean.
9 .6 .6 Clean the Tray Assembly
NOTE
► Refer to
Section III, Item 10 .3 .1,
for instructions on removing the tray from the compartment assembly.
Required supplies:
► Soft cotton cloth
► Mild detergent solution
Clean trays and covers:
1
Apply mild detergent solution to the tray and cover.
2
Using a cotton cloth, wipe the tray and cover dry.
9.6.7 Clean Probe Bottle and Refill Solution
► Grill must be removed to gain access to the probe and probe bottle.
► Temperature probes are fragile; handle with care.
Required supplies:
► Fresh water-bleach solution
● 1:10 ratio of bleach to water
● Bleach is 5% solution of commercial sodium hypochlorite (NaOCl) (Equivalent oxidizing cleaner/
disinfectant approved by your organization may be substituted)
► 4 oz. (120 mL) of product simulation solution per bottle
● 10:1 ratio of water to glycerin
Clean and refill bottle:
1
Remove probe(s) from bottle.
2
Remove bottle from bracket.
3
Clean bottle with water-bleach solution.
4
Rinse bottle thoroughly with tap water.
5
Fill bottle with 4 oz. (120 mL) of product simulation solution.
6
Cap bottle tightly to minimize evaporation.
7
Place bottle in bracket.
8
Replace probe(s), immersing at least 2” (50 mm).
9 .6 .8 i .C³
®
Touchscreen
The i.C³ touchscreen is sensitive to excessive pressure when touched. Use light pressure when cleaning the touchscreen.
Required tools:
► Soft cotton cloth
Clean the screen:
1
Using a soft cotton cloth, wipe the screen clean.