HDMI Sirius-PJ2, Руководство по обслуживанию на месте

Страница: 23 / 172

No. Name Function
33 ID SET Button
The remote controller that comes with this projector can be used to
control multiple projectors. This button is used to set the control ID of
an individual projector.
34 Computer Button Selects the COMPUTER input.
35 Ethernet Button Selects the Ethernet input.
36 BNC Button Selects BNC Input (Analog RGB or Component Signal).
37 HDMI 1 Button Selects the HDMI 1 input.
38 HDMI 2 Button Selects the HDMI 2 input.
39 INPUT Button
Pressing the INPUT button briefly displays the "INPUT" screen.
Pressing the INPUT button for one second or longer checks the
signal inputs automatically in the following order: HDMI 1 HDMI
2 DisplayPort BNC BNC(CV) BNC(Y/C)
COMPUTER USB-A. When the projector detects a signal input, it
projects the input signal.
40 PIP Button
Press to project the sub-screen inside the main display, and to
display the menu for selecting the input terminal for the sub-screen.
41 PBP/POP Button
Press to project the main screen and sub-screen side by side, and to
display the menu for selecting the input terminal for the sub-screen.
42 Edge Blend. Button
Press this button to make the edges (boundaries) of the projection
screen indistinguishable.
43 TEST Button Displays the test pattern.
44 FREEZE Button
Displays the current video image as a still image. Pressing the
button again returns to normal video display.
45 BLANK Button
Press this button to blank the picture for a short period of time. Press
again to restore the picture.
46 STANDBY Button
Pressing the STANDBY button once displays the power-off
confirmation message. Pressing the ENTER button or STANDBY
button again turns the projector off (standby).
Overview
21