Hawkeye Mfg AGCO RoGator A Series, Руководство по установке

Страница: 9 / 54

CHAPTER
2
Introduction: Make and Model Compatibility 5
CHAPTER 2
INTRODUCTION
MAKE AND MODEL COMPATIBILITY
Hawkeye® 2 is a pressure-based product control system which allows for precise sprayer application over a range
of conditions and reduced spray drift. Each nozzle is controlled by an individual pulsing valve giving a consistent
spray pattern as speed and conditions change.
Hawkeye® 2 is built on the ISOBUS communication platform which allows the system to work with most ISO
Universal Terminals (UTs) and task controllers, including the Viper® 4.
This manual is intended to provide installation instructions on the following equipment:
TABLE 1.
Compatible Equipment Information
MACHINE CONFIGURATION NOTES
• It is not necessary to check the fence row option as this functionality is controlled via AGCO switches and
cabling.
• When prompted to enter the number of sections and section widths in the wizard, refer to the machine
configuration and setup for sections and section widths.
• Do not modify the switch mapping because Hawkeye® 2 will auto-fill the switch mapping values. The sections
will map the same number of switches as there are sections.
• The AGCO AccuTerminal does not need to have settings changed to function with Hawkeye® 2.
• The AGCO AccuTerminal and other ECUs should be updated to the latest software by an AGCO Service
Provider.
Make and Model Nozzle Body Type
Nozzle
Spacing
Boom
Width
Kit Number
AGCo RoGator A/B-Series
(RG900, RG1100, RG1300)
Hypro
20”
120’ 117-2005-190
100’ 117-2005-191
19” 100’ 117-2005-192