Hawkeye Mfg AGCO RoGator A Series Скачать руководство пользователя страница 36

Страница: 36 / 54

CHAPTER 5

Hawkeye® 2 Installation Manual for AGCO RoGator A/B-Series (RG900, RG1100, RG1300)

8. Connect the BIS connector removed in the previous step to the remaining open plug on the RoGator ISOBUS

Tee Cable (P/N 115-0172-325).

FIGURE 10. RoGator ISOBUS Tee Cable Installed

NOTE:

The 3-pin cap on the end of the RoGator ISOBUS Tee Cable is an ISOBUS terminator. This must be left

in place unless Sidekick Pro Injection Pump(s) are being connected to the ISOBUS. See Chapter 7,

Sidekick Pro™ ICD Installation

for connecting injection pumps to the ISOBUS with the RoGator ISOBUS

Tee Cable.

SINGLE PRODUCT NODE REMOVAL

1. Locate the gray and black connectors on the existing single product node and the gray and black receptacles

on the Hawkeye® 2 retrofit cable (P/N 115-2005-317).

2. Disconnect the black plug from the single product node and connect to the black receptacle on the retrofit

cable.

3. Disconnect the gray plug from the single product node and connect to the gray receptacle on the retrofit

cable. The single product node will not be reused with the Hawkeye® 2 system and may be set aside.

BOOM/SPEED SENSE NODE REMOVAL AND ECU CONNECTION

1. Locate the gray and black connectors on the existing boom/speed sense node and the gray receptacle on the

boom/speed retrofit cable (P/N 115-7303-084).

2. Disconnect the gray plug from the boom/speed node and connect to the gray receptacle on the boom/speed

retrofit cable.

3. Insert the remaining gray plug on the boom/speed retrofit cable into the new ISO boom/speed ECU (P/N 063-

0173-635) previously installed.

BIS Connector

ISOBUS Terminator

Hawkeye Retrofit

Cable

Содержание AGCO RoGator A Series






















































Результаты поиска

Содержание AGCO RoGator A Series

Отзывы:

Бренды по названию

Популярные бренды

Hawkeye Mfg AGCO RoGator A Series, Руководство по установке

Результаты поиска

Содержание AGCO RoGator A Series

Отзывы:

Бренды по названию

Популярные бренды