CHAPTER 7
42
Hawkeye® 2 Installation Manual for AGCO RoGator A/B-Series (RG900, RG1100, RG1300)
10. Locate the 4-Pin adapter cable and ISOBUS terminator removed from the ISOBUS Tee Cable (P/N 115-0172-
325) in a previous step.
11. Install the adapter and ISOBUS terminator onto the connection that the Raven Passive Terminator was removed
from.
NOTE:
If the ISOBUS Tee Cable (P/N 115-0172-325) was previously installed, skip step 12 through step 17.
12. Remove the first connector from the front of the ISOBUS bar located in the bottom of the ECU cabinet along
the edge closest to the rear of the machine.
FIGURE 2. First ISOBUS Bar Connector.
13. Plug the mating connector of the ISOBUS adapter tee (P/N 115-0172-325) into the open first port of the ISOBUS
bar.
14. Locate the mating connection on P/N 115-2005-317 and plug it into the ISOBUS Tee Cable (P/N 115-0172-325).
15. Locate the Raven CANbus bar along the edge of the ECU cabinet furthest from the center of the machine.
16. Locate and disconnect the connector labeled “BIS” from the Raven CANbus bar.
17. Connect the BIS connector removed in the previous step to the remaining open plug on the RoGator ISOBUS
Tee Cable (P/N 115-0172-325).
FIGURE 3. Adapter Cable (P/N 115-0172-325)
18. Secure any cables.
19. Replace the cover of the ECU cabinet.
Disconnect
To ISOBUS Bar
- First Port
To BIS Connection
ISOBUS Terminator
To Hawkeye® 2 Retrofit
4-Pin to 3-Pin Adapter
Содержание AGCO RoGator A Series
