Hawkeye Mfg AGCO RoGator A Series, Руководство по установке

Страница: 41 / 54

6
Chassis Cable Installation: Hawkeye® 2 Power Connections 37
CHASSIS CABLE INSTALLATION
HAWKEYE® 2 POWER CONNECTIONS
1. Disconnect the battery switch by turning the battery disconnect switch below the catwalk near the cabin floor.
2. Locate the battery compartment under the catwalk outside of the cabin door.
FIGURE 3. RoGator Battery Compartment Location
3. Remove the walkway cover and the battery compartment cover.
4. Route the power and ground wires of the Hawkeye® 2 NCV power cable (P/N 115-2005-316) along the frame
rail and then behind the cab to the battery compartment.
5. Route the power and ground wires into the battery compartment. Keep the breaker on the outside of the
battery compartment.
6. Use zip ties to secure the breaker to the existing cables near the battery compartment.
7. Connect the red battery power lead to a positive battery terminal.
8. Locate the battery disconnect switch and remove the nut from the top-left terminal.
9. Connect the black battery ground lead to the negative bolt on the battery disconnect switch and reinstall the
nut.
10. After the installation is complete, reconnect the battery disconnect switch before operating any equipment.
FIGURE 4. Battery Disconnect Switch Location
Machine
Battery Box
Access
Battery Disconnect
Switch