Specied resistance: 26 ohms, permissible deviation ± 6 ohms
If the deviation is more, the coil is faulty and must be replaced.
5. Simultaneously insert the two screwdrivers into the gap
between the connection block (1) and the solenoid housing
(2). Carefully and evenly push the solenoid housing off the
pressure tube.
6. The pressure tube (1) is exposed. Take the coils (2) out of the
solenoid housing (3).
7. Center and slide the new coil onto the pressure tube.
8. Push the solenoid housing over the coil and pressure tube
so that the slot in the solenoid housing is pushed over the
lower part of the coil. Push on the solenoid housing until it
engages.
9. Place the assembly aid (1) on the solenoid housing (2) and
carefully x the solenoid housing in place by lightly tapping
the assembly aid with the plastic hammer.
48/63
B 6052-21 -
11
-2021 - 1.7
HAWE Hydraulik SE
