9. Apply threadlocking adhesive to the cylinder base’s internal
thread.
Spread a visible amount of the adhesive onto the rst
thread turns.
Fill at least one turn of the internal thread with adhesive.
10. Screw the rod end with nut into the thread of the cylinder
base.
Comply with the minimum screw travel L(1) in the customer
drawing.
11. Apply threadlocking adhesive to the rod end’s thread.
Spread on an easily visible amount of adhesive 3 mm from
the base.
Fill at least one turn of the thread with adhesive.
46/63
B 6052-21 -
11
-2021 - 1.7
HAWE Hydraulik SE
