DAMAGE
Hazard for electronic components – property damage
►
To prevent electrostatic discharge, do not touch electronic components and contacts.
►
After switching off the electrical power supply, wait at least 15 minutes for the energy stored in
the capacitors to dissipate.
►
Do not expose components to moisture and an aggressive environment.
►
Always keep any ventilation outlets unobstructed to prevent overheating.
1. Secure the ride against unintentional starting.
2. Connect the solenoid valves to the control system:
The coil has a socket for 2-pin plugs.
Use cable with a matching plug according to the technical data sheet.
Pin assignment is not important
Plug the cable plug into the coil’s socket.
Then connect cable to the electrical power supply.
3. Check whether the HLU has any more solenoid valves that require connecting and connect them as
instructed in step 2.
4. Check electrical connection after one week of operation.
HAWE Hydraulik SE
B 6052-21 -
11
-2021 - 1.7
25/63
