Hart Sceintific DewK 1620, Руководство пользователя

Страница: 91 / 158

8.4 Commands
Table 4, Alphabetical List of Commands, lists the commands in alphabetical or-
der. In this section the commands are arranged into the following groups:
Alarm Commands - commands for alarm settings.
Measurement Commands - commands for reading measurement data.
Data Commands - commands for setting and reading data information
Measurement Control Commands - commands for the timing and action of
the measurement process.
Channel Commands - commands for selecting channels.
Calibration Commands - commands for calibration settings.
System Commands - commands for general system configuration parameters.
Communication Interface Commands - commands for controlling the inter-
face configuration (serial and IR ports).
Date and Time Commands - commands for setting the date, time and the date
and time formats.
Password Commands - commands for enabling and disabling the password,
for setting the password, and for checking the password protection state.
Status Commands - commands to report the status and condition of the
instrument.
Each section provides the command structure (long and short format), a de-
scription of the command purpose, a command example, an example of what
the command returns (as applicable to query commands), and notes specific to
the command. The following apply to each group of commands:
•
Upper case letters designate syntax that is required when issuing the com-
mand. Lower case letters are optional and may be omitted.
•
<> indicates a required parameter.
•
[] indicates an optional parameter.
•
() indicates a group of parameters that must be used together.
•
‘|’ indicates alternate parameter values.
•
<str> indicates a string of ASCII characters is required.
•
<chn> indicates a channel number is required.
•
<num> indicates an integer value is required.
84 Hart Scientific
8 Digital Communications Interface