manualshive.com logo in svg

Hart Sceintific DewK 1620, Руководство пользователя

Поделиться
Скачать
Hart Sceintific DewK 1620 Скачать руководство пользователя страница 14

Symbol

Description

Canadian Standards Association

OVERVOLTAGE (Installation) CATEGORY II, Pollution Degree 2 per IEC1010-1 refers to the
level of Impulse Withstand Voltage protection provided. Equipment of OVERVOLTAGE CATE-
GORY II is energy-consuming equipment to be supplied from the fixed installation. Exam-
ples include household, office, and laboratory appliances.

C-TIC Australian EMC Mark

1.2

Safety Information

Use this instrument only as specified in this manual. Otherwise, the protection
provided by the instrument may be impaired.

The following definitions apply to the terms “Warning” and “Caution”.

•

“Warning” identifies conditions and actions that may pose hazards to the
user.

•

“Caution” identifies conditions and actions that may damage the instru-
ment being used.

1.2.1

Warnings

To avoid personal injury, follow these guidelines.

•

DO NOT

use this unit in environments other than those listed in the

User's Guide.

•

Follow all safety guidelines listed in the User's Guide.

•

Calibration equipment should only be used by trained personnel.

•

The AC adapter can present safety concerns if misused or damaged. To
avoid the risk of electric shock or fire, do not use the AC adapter outdoors
or in a dusty, dirty, or wet environment. If the cord, case, or plug of the
adapter is damaged in any way, discontinue its use immediately and have
it replaced.

•

Never disassemble the AC adapter. Use only the AC adapter provided
with the instrument or equivalent adapter recommended by the manufac-
turer of this instrument.

•

The AC adapter has circuits with high voltage inside that could present
danger of electrical shock or fire if exposed. If the AC adapter is damaged
in any way or becomes hot, discontinue its use immediately, disconnect it

2

Hart Scientific

1 Before You Start

CAT

Содержание DewK 1620































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды