In case of a substandard installation or a malfunction caused by substandard installation,
please contact first the company that has carried out the installation. If the errors still
cannot be rectified, please contact the technical support of
eCharge
.
Via Mail
Via phone
+49 (0) 9666 – 188 00 50
Please make sure to store this manual in a safe and always accessible place.
The service case occurs when...
•
...the housing has been mechanically damaged
•
...the housing cover has been removed or can no longer be closed or locked.
•
...adequate protection against splash water and/or foreign bodies no longer seems
to be provided.
•
...the charging sockets and/or the external charging cables have been functionally or
visibly damaged.
•
...the charging station does not function properly or has been damaged in some
other way.
Also note the following:
• The cPH2 is protected against spray and splash water according to IP 54. However,
it should not be installed in the immediate vicinity of flowing or jet water.
• The cPH2 charging station must not be installed in an environment with danger for
explosions (EX-area).
• The charging station must not be installed in areas subject to flooding.
• Note that additional overvoltage protection may be required by a connected
vehicle and/or by national regulations.
• Please note that in some countries (other than Germany) and/or due to various
vehicle manufacturers, tripping characteristics of the fault-current circuit breaker
(type B) can be required. Please contact your distributor to learn about the
requirements.
Installation and operating manual
cPH2
charging station
Version: 1.0.9
6
