6.
Start of the charging process:
In the default configuration, the charging process starts immediately after the
authentication via RFID card has been successfully performed. When the charging
process starts, the color of the status LED of the associated charging socket changes
from yellow to blue.
7.
the charging process is usually terminated only by the vehicle. The LED STATUS changes
from blue to yellow. After the charging process is completed, first pull the cable out of
the socket on the vehicle and then (if present) out of the Type2 socket on the Wallbox. If
the vehicle is not 100% charged in this case,
please check the settings in your vehicle. You usually have the option of setting a charge
limit (e.g. at 80%) in the vehicle's on-board computer.
Installation and operating manual
cPH2
charging station
Version: 1.0.9
20
