Instructions for use / Maintenance
Observe the following instructions for use or maintenance of your charging station:
•
This device must
ALWAYS
be connected to the protective conductor of the power
supply!
•
Ensure that the rated voltage and current of the device comply with the specifications
for your local power grid and that the rated power is not exceeded during charging
operation.
•
At all times, observe the locally applicable safety regulations for the country in which
you are operating the charging station.
•
To disconnect the charging station completely from the mains, the supply line must
always be interrupted via the upstream circuit breaker(s).
•
Never install and operate the charging station in confined spaces. In particular, it must
be ensured that vehicles can be parked at the prescribed distance from the charging
station for charging operation and can be connected to the charging cable without
tension.
•
Make sure that the front housing cover of the charging station is always closed to
prevent unauthorized opening of the housing.
• DO NOT
make any changes to the housing or the internal circuitry of the device!
Failure to do so fundamentally violates the terms of the warranty and voids the
warranty with immediate effect.
•
There are no maintenance parts in the device for the user.
•
Have the device repaired and/or installed by qualified personnel only.
ATTENTION!
This cPH2 charging station is intended for connection and operation at
230V / 400V and 50 Hz mains voltage. The supply line must be inserted
into the housing via the M32 cable gland provided for this purpose!
Installation and operating manual
cPH2
charging station
Version: 1.0.9
7
