Hardi HC 8500 Скачать руководство пользователя страница 78 | Manualshive

Страница: 78 / 184

Hardi HC 8500 Скачать руководство пользователя страница 78

4 - System setup

4.52

Setup button. Press to enter information for the Grower’s Name, Tax ID and Memo.

Remove button. Press to remove a Grower.

÷

NOTE! Personal Information entered at this screen can be added or edited at any time.

Farm and Field

In the display, farms are subdivided into fields. You
can associate Field names with a particular Grower.
If the display will be used for multiple Growers,
enter each Grower business name and associate
the field names with the correct grower when the
fields are set up within the system.

In the Field Tab, select a Grower underneath the
drop-down menu at the top. Each farm of that
particular grower is shown in a list, with the fields
within that farm as sub components within that
list.

•

Add button

Press to add a Field.

•

Rename button

Edit an existing name of a Field by highlighting that name and pressing button.

•

Setup button

Edit the Farm and Field information by highlighting that name and pressing button. The Field Information screen
appears.

•

Remove button

Press to remove a Field.

Grower/Farm/field

Season

Operator

Grower: Gene Eilers

Farm: Sheldon

Field: Low 80

Grower: Seth

80 ac

True Area:

Boundary

79.92 ac

Clear

Management Setup

Businesses

«
...
76
77
78
79
80
...
»

Содержание HC 8500

























































































































































































Отзывы:

Нет отзывов