Hardi HC 8500 Скачать руководство пользователя страница 136

Страница: 136 / 184

5 - Operation

5.2

•

Ranges

The Ranges

change the number of range increments displayed in the legend.

•

Color Scheme

The Color Scheme can be modified by using the drop-down list. Choices include the following:

•

Green-Yellow-Red

•

Single Hue (blues or greens)

•

Rainbow

•

Reset to Default Legend

Resets the legend to the default settings.

•

Automatic Legend

If the Automatic Legend check box is selected, the average automatically sets itself to the field average and updates
as the field average changes.

•

Reset to Default Legend

Press the reset legend to the system default.

•

Save as Product Legend

Select the Save as Product Legend check box if you wish to set the current legend as the default legend for all regions
of the same product.

Edit Markers

Marker Sets:

Pressing

allows operator to create, name,

and delete marker sets.

Markers:

•

Press

to add a marker.

•

Press

to edit a marker.

•

Press

to remove a marker.

•

If you have numerous map icons, you can

cycle through them by pressing

•

When creating or editing a marker, check the
Georeferenced Note button if you wish to
add a Field Note that is referenced to the current GPS position when that marker is used.

Marker Management

Marker Sets

All Markers

Markers

Tree

Rock

Weeds

Load Reference

Marks

Содержание HC 8500

























































































































































































Результаты поиска

Содержание HC 8500

Отзывы:

Hardi HC 8500, Руководство оператора, Страница: 136 / 184

Результаты поиска

Содержание HC 8500

Отзывы: