Hardi HC 8500 Скачать руководство пользователя страница 77

Страница: 77 / 184

4 - System setup

4.51

Rename button.

Press to rename the product.

Remove button

Press to remove a product.

NOTE! When you remove a product all regions using that product will also be removed!

Application Settings

For more information, see “Legend Settings” on page 5.1.

Management button

The Management tabs, which are accessible from the Management button on the Setup screen, include Grower/Farm/Field,
Season, and Operator.

Grower/Farm/Field tab

Grower

The Grower refers to the business or person that the system is in operation for. Contact information can also be entered for
each Grower. The Grower information will be passed into mapping software for automatic Grower setup within desktop
software.

Add button. Press to add a Grower.

Rename button. Edit an existing name of a Grower by highlighting that name and pressing button.

Edit Info button

Press to edit the following information for the highlighted product in the Product List.

•

Product Units

•

Manufacturer

•

EPA Number

•

Check box for restricted use pesticides

Edit Legend button

Press to change the legend settings listed below.

•

Average

•

Range Spacing

•

Color Scheme

•

Ranges

•

Reset to Default Legend

Grower/Farm/Field

Содержание HC 8500

























































































































































































Результаты поиска

Содержание HC 8500

Отзывы:

Hardi HC 8500, Руководство оператора, Страница: 77 / 184

Результаты поиска

Содержание HC 8500

Отзывы: