manualshive.com logo in svg

Hardi HC 8500, Руководство оператора, Страница: 32 / 184

Поделиться
Скачать
Hardi HC 8500 Скачать руководство пользователя страница 32

4 - System setup

4.6

Initial Startup

General info

An Initial Setup wizard is presented on startup. The wizard is presented if the display is brand new out-of-the-box with 6.0 
software or following the 6.x upgrade.

÷

NOTE! Not all of the following parts may be required to follow - it depends on your specific setup.

Once the wizard is completed, it is not shown again unless the display memory is cleared.

Advanced Options

Press “Advanced” button on Language Selection 
screen (first screen to appear on initial startup).

Select:

•

Restore Backup

•

Upgrade Firmware

•

Unlock Display Features

÷

NOTE! Using the Restore backup option is 
not the proper method to get multiple 
displays set up to be the same. Use the 
AGSETUP file.

It is acceptable to complete the initial setup wizard 
and then upgrade. Setup information will not 
change.

•

On a “clean” display going out for service, to 
stand in for a failed display, the customer 
should use the Restore backup option in the 
initial setup wizard.

Display Setup: Select Language

Language

English/US

Advanced

Advanced Options

Feature 

Unlocks

Upgrade

Restore

Restore data from a backup file (same display model only)

Upgrade the display firmware.

Unlock display features.

Advanced Options

Содержание HC 8500

























































































































































































Отзывы:

Нет отзывов