manualshive.com logo in svg

Hardi HC 8500, Руководство оператора, Страница: 143 / 184

Поделиться
Скачать
Hardi HC 8500 Скачать руководство пользователя страница 143

5 - Operation

5.9

5.

Instance Selection

A.

Press the “Select Map Instance” drop 
down menu to select a New Map or 
add to an existing instance.

B.

Press 

 to continue.

7.

Return to Home screen.

Field Finder

When the steps in the Setup Event Wizard are completed, you are now returned to the Home screen.

If you have an existing field boundary, and your current GPS position is within that field boundary, the display will 
automatically pick the correct Grower, Farm and Field combination when you start a Field Operation.

Region button:

A region is used to subdivide a field into smaller sections. The region in which data is currently being 
logged is listed on the Region button. A new region can be created at any time as you are performing a 
field operation.

To change between or add a new region to a field, press the Region button and follow the on-screen 
instructions.

Field Notes button:

Edit any of the report items that are listed in Smart Report™. For more information, see “Smart Reports™ 
(HC 9500 only)” on page 5.25.

Field Operation Wizard: Instance Selection

Select Map Instance

Water

Region:

<1>

Region:

Содержание HC 8500

























































































































































































Отзывы:

Нет отзывов