Hardi HC 8500, Руководство оператора, Страница: 114 / 184

4 - System setup
4.88
Select a Previous SmartPath Pass
If you have specified SmartPath as your desired pattern, but you are not following an active guidance pattern, the Guidance
System automatically begins searching for SmartPath patterns for your use.
If you wish to use a previously-created SmartPath pattern, you can do so by pressing on the Active Line
Cycle button. This button allows you to cycle between available SmartPath patterns.
÷
NOTE!
•
When the guidance system looks for other available SmartPath patterns, it first displays the nearest-available
pass.
•
You can adjust the available area in which the Guidance System searches for previously-created SmartPath
passes. To do this, adjust the Heading Threshold settings on the Smart Tab of the Guidance Option screen.
SmartPath Guidance Options
SmartPath only creates a SmartPath pass when you are logging data in the field. However, you have the option
of using it to create SmartPath passes continually during all field operations.
To adjust this setting, press the Guidance Options
button on the Guidance Tab. The Guidance
Options screen appears. Press the Smart Tab.
•
The default setting is Logged Area. This
setting only creates passes while you are
logging field data.
•
By selecting All Area Covered, you can create
SmartPath passes even when not logging
field data.
•
The Heading Threshold setting is the
available area that the Guidance System uses
to search for previously-created SmartPath
passes. The default setting is 20 degrees.
If you chose Adaptive Curve as your pattern option
at the New Pattern screen, the Adaptive Curve
button appears on the Guidance Options screen.
This button opens the Adaptive Pattern Options
screen. At this screen, you can choose pattern
options that tell the system where to log a new
pass. These options include:
•
New Pass
This sets the conditions for the display to log a new pass. Select either Area Count or Heading Change.
•
Area Count
Generates the next pass, based on coverage area of the previous pass. The display must be logging coverage
data in order to generate the next pass.
•
Heading Change
Logs the next pass when the vehicle turns past the heading threshold.
•
Heading Threshold
Enter in the degree of turning angle that your vehicle will need to make before creating another pass.
÷
NOTE! You should always set the Heading Threshold number past 90 degrees. The default number is 110 degrees.
Nudge
Path Generation
Smart Lightbar
Save
Pause
Logged Area
Heading
Threshold
All Area Covered
Guidance Options
degrees
Save
Group