manualshive.com logo in svg

Hardi HC 8500, Руководство оператора, Страница: 155 / 184

Поделиться
Скачать
Hardi HC 8500 Скачать руководство пользователя страница 155

5 - Operation

5.21

Finalize Event

During a field operation, you can suspend or close the event by pressing on the wrench at the end of the Grower Farm Field 
(Select Event) button.

This opens the Events Options screen.

The Event Options screen allows operator to 
change:

•

Event Name.

Select the event to be edited in the drop 
down menu. An active event will be 
preselected when the Event Options screen 
is opened.

•

Suspend Event.

Pressing this button suspends the current 
field operation. The Home screen then 
appears as before the creation of a field 
operation, as shown on “Home Screen” on 
page 4.15.

•

Clear Map Bounds.

Press to clear map bounds for the selected 
event.

•

Close Event.

Pressing this button ends the current field operation. The Home screen then appears as before the creation of a field 
operation, as shown on “Home Screen” on page 4.15.

A closed event cannot be re-opened and will not show up in the Event Selection screen. A user can manually close 
Events or be prompted to close events.

•

Prompt to Close Events.

Check this to be prompted before an event is accidentally closed.

Event:

Grower:

Farm:

George Eilers
Sheldon

Field: Orab

Event Options

Suspend 

Event

Clear Map 

Bounds

Close 

Event

Prompt to 

Close Events

Event Name

Содержание HC 8500

























































































































































































Отзывы:

Нет отзывов