manualshive.com logo in svg

Hardi HC 8500, Руководство оператора, Страница: 163 / 184

Поделиться
Скачать
Hardi HC 8500 Скачать руководство пользователя страница 163

6.1

6 - Maintenance

General info

Service

There are no user-serviceable parts inside the display. Contact the HARDI® dealer for a Return Material Authorization (RMA). 

€

DANGER! This display has an internal lithium coin cell battery that is good for the life of the product and does not 
need to be replaced. There is a risk of explosion if the battery is replaced by an incorrect type. Dispose of used 
batteries according to the battery manufacturer’s instructions.

Fuse Installation and Replacement

Fuse Type: Blade Style (ATO/ATC)

Rating:

Fuse Holder (orange wire) 5A, 250 VAC

Fuse Holder (pink wire) 15A, 250 VAC

€

DANGER! The fuse is to be placed in the fuse holder in-line with the battery power cable and used with display only.

System and Upgrades

Contact your HARDI® dealer for technical support.

Automated Module Firmware Upgrade

In the display, all display and module firmware upgrades are packaged in a single .fw2 file. The module firmware files are 
stored internally in the display. A warning alerts you when a module upgrade is required. You can upgrade all files in a single 
batch by using an upgrade screen. For more information, see “Advanced tab” on page 4.65.

Содержание HC 8500

























































































































































































Отзывы:

Нет отзывов