manualshive.com logo in svg

Hardi HC 8500, Руководство оператора, Страница: 19 / 184

Поделиться
Скачать
Hardi HC 8500 Скачать руководство пользователя страница 19

3 - Description

3.7

GPS Signal Indicator

The GPS button in the upper left-hand corner of the Map screen, displays the following colors:

Differential GPS

Green

 if you are receiving a differential GPS signal

GPS - No differential

Yellow

 if you are receiving GPS, but no differential signal

No GPS

Grey 

if you are receiving no GPS signal.

Flex Mode icon

Appears for ParaDymes using Flex Mode. Flex mode provides continuity of position solution to maintain automated steering 
by seamless flexing (transitioning) to a lower accuracy mode when a higher accuracy mode is lost; such as loss of the RTK 
radio link.

Flex Mode - ON (GREEN)

Flex Mode - Exceeded (YELLOW)

Device Information button

Opens screens that display Device Information, Memory, Display, and display diagnostics.

÷

NOTE! For more information, See “Device Information” on page 7.1.

Vehicle Icons

Vehicle Icon - Zoom to Extent

The Vehicle Icon is shown by an arrow inside a circle if the Map screen is viewed in Zoom to Extent.

The vehicle appears as a gold-colored triangle if the Map screen is viewed in Zoom Detail. The appearance of the zoomed-
in icon changes depending upon the data being logged in the field.

Vehicle Icon - Spraying (with all sections ON)

When the vehicle is logging data from the implement split into sections, then these sections appear 
in the implement icon.

Vehicle Icon - Not Spraying. Sections OFF by Switch (with all sections OFF)

The vehicle is not logging data, when the implement icon appears as a red bar.

Vehicle Icon - Not Spraying. Sections OFF by AutoSectionControl (AutoSwath) (with all sections OFF)

The vehicle is not logging data, when the implement icon appears as a grey bar.

Содержание HC 8500

























































































































































































Отзывы:

Нет отзывов