Hardi ALPHA 2000, Инструкция

Страница: 23 / 52

23
ALPHA
Tilting of the cab
The cab can be tilted for easy access during mainte-
nance jobs. An electric ram is available for this purpose.
1. Unfold the boom inner sections to improve access.
2. Fit the electric ram under the cab and secure with
lynch pins.
3. Connect the plugs between control box and the ram.
4. Connect the terminal clips to battery: Red to pos. (+)
and black to neg. (-).
5. Remove the two bolts in left hand-side front and back
of the cab.
6. Remove the transport bracket cross sectional bar
(only on OLH booms with Air conditioning).
7. The cab is now tilted.
8. The cab is lowered in reverse order.
IMPORTANT! Always remember to fit and tighten the
two securing bolts again. Never drive with the electric
ram connected, as it will disable the cab rubber suspen-
sion.
Maintenance
To keep the machine in good, safe and reliable working
order, as well as keeping the maintenance and repair
costs to a minimum it is essential to follow the preven-
tive maintenance programme given hereafter.
Lubrication table
C omponent Capacity Lubricant
DEUTZ engine: 4 cyl. 9.5 litres TOTAL Rubia XT
6 cyl. 15.5 litres Castrol Powermax
Shell Myrina M
Mobil
®
Delvac
®
Hydrostatic transmission
Hydraulic system
60 litres TOTAL Equivis 46
Hydrostatic steering Castrol Hyspin AWH 46
Shell Tellus T46
Mobil
® DTE ® 15 M
Diaphragm pump - Lithium based ball bearing (grease
nipple) grease, NLGI No. 2-2.5:
TOTAL Multis EP 2
CASTROL LMX Grease
Shell HD Retinax MS
Mobil
®
Mobilux EP 2 NC
Chassis and boom - Lithium based grease with grease
nipples molybdæniumdisulfide and
graphite:
Castrol Molymax
Shell SAS 4000
Mobil
® Mobilgrease Special
Oil lubrication points - TOTAL Transmission TM
SAE 80W/90
Castrol EPX 80/W90
Shell Spirax 80W/90
Mobil
® Mobilube ® 80W/90
Engine cooling system: Deutz coolant anti-freeze, 45%
4 cyl.: 11 litres Castrol anti-freeze 50%
6 cyl.: 15 litres Glycoshell, 50%
Mobil, 50%
Fuel and lubricants storage
Always store fuel and lubricants clean, dry and cool -
preferably by constant temperature - to avoid contami-
nation by dirt and condensed water.
When having refilled the fuel storage tank, allow sedi-
mentation of possible dirt, condensed water and sludge
- wait 24 hours before refilling the sprayer fuel tank.
Drain water and sludge from storage tank once a year, if
possible.
Keep oil filling jugs and hoppers clean.
B
A
C
T060-0033
T060-0034